NSN P1534A

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

4.400 inches nominal overall width, nonportable installation design, 5.6 voice coil nominal impedance rating in ohms, 7.500 inches nominal overall length, 3.000 inches nominal overall height.

NSN 5965-01-522-7205 Datasheet

(NSN) National Stock Number

5965-01-522-7205

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

01-522-7205

Requires Demilitarization

Yes

(INC) Item Name Code

52110

Date

Tue, Aug 10, 2004

Schedule B Code

8518210000

Impedance Rating In Ohms

5.6 voice coil nominal

Installation Design

nonportable

Overall Height

3.000 inches nominal

Overall Length

7.500 inches nominal

Overall Width

4.400 inches nominal

Style Designator

rectangular/square enclosure

Terminal Type

connector, plug

Transducer Type

cone

Usage Design

indoor

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0052110

Cross Reference

CAGE Codes

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

G - 125.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35070

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063035

Schedule B & Trade

Schedule B

8518-21-0000

Description

single loudspeakers, mounted in their enclosures

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76422

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-01-522-7205?

   The FSCG of the NSN 5965-01-522-7205 is 5965

2. Does the NSN 5965-01-522-7205 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518210000

3. Does NSN 5965-01-522-7205 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-01-522-7205 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5965-01-522-7205 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-01-522-7205 was assigned to the Federal Catalog?

   It was assigned 22 years ago, on Tue, Aug 10, 2004