NSN PA024-6853

An item consisting of a cannulated needle with an intravenous catheter, and it may contain additional components, such as a hypodermic syringe, needle guard, flow control plug, and the like. The catheter is inserted into the vein by way of the needle's puncture, and is left in position for continued intravenous administration after the needle is withdrawn. A syringe, when supplied, is used to better control insertion of the catheter needle unit or for blood aspiration.

50.0 milliamperes resistive load ac at altitude contact load current rating, 150.0 milliamperes resistive load ac at sea level contact load current rating, 1.5 amperes resistive load and 250.0 milliamperes inductive load dc at altitude contact load current rating, breaks before makes third section rear contact switching action, 2.0 amperes resistive load and 500.0 milliamperes inductive load dc at sea level contact load current rating.

NSN 5930-00-934-3240 Datasheet

(NSN) National Stock Number

5930-00-934-3240

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-934-3240

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Feb 20, 1970

Schedule B Code

8536509025

Contact Load Current Rating

50.0 milliamperes resistive load ac at altitude

Contact Load Current Rating

1.5 amperes resistive load and 250.0 milliamperes inductive load dc at altitude

Contact Load Current Rating

150.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

2.0 amperes resistive load and 500.0 milliamperes inductive load dc at sea level

Contact Switching Action

breaks before makes third section rear

Contact Voltage Rating In Volts

115.0 ac at altitude

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at altitude

Contact Voltage Rating In Volts

28.0 dc at sea level

Detent Rotational Torque Range

+2.000 to 8.000 inch-pounds single actuator

First Flat Length

0.380 inches nominal single actuator

Flat Height

0.216 inches nominal single actuator

Individual Section Quantity

3

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.530 inches nominal at 3:00 oclock

Nonturn Device Type

pin at 3:00 oclock

Operating Temp Range

-65.0 to 125.0 celsius

Overall Diameter

1.540 inches maximum

Overall Length

2.780 inches nominal

Pole Quantity

1 third section rear

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

330.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.500 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

7 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical and nonpile-up nonsymmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.380 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

7 third section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

71590

Crl Components Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-934-3240?

   The FSCG of the NSN 5930-00-934-3240 is 5930

2. Does the NSN 5930-00-934-3240 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-934-3240 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-934-3240 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-934-3240 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-934-3240 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, Feb 20, 1970