NSN PART7436

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.000 inches nominal cable entrance diameter, 30.0 single mating end single contact grouping contact maximum current rating in amps, ""2,2-30" single mating end" contact position arrangement style, 250.0 single mating end single contact grouping contact maximum ac voltage rating in volts, cable clamp connector cable strain relief method.

NSN 5935-00-549-5138 Datasheet

(NSN) National Stock Number

5935-00-549-5138

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-549-5138

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Tue, Jan 1, 1963

Schedule B Code

8536695050

Cable Entrance Diameter

1.000 inches nominal

Connector Cable Strain Relief Method

cable clamp

Contact Maximum Ac Voltage Rating In Volts

250.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

30.0 single mating end single contact grouping

Contact Position Arrangement Style

""2,2-30" single mating end"

Included Contact Quantity

2 single mating end single contact grouping

Included Contact Type

flat pin single mating end single contact grouping

Insert Material

plastic phenolic single mating end

Mating End Quantity

1

Overall Diameter

2.750 inches nominal

Overall Length

2.062 inches nominal

Shell Material

steel

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

B64 - U.s. Army aviation & missile command, attn: amsmi-lc-mm-c, redstone arsenal,al 35858-5230

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

74545

Hubbell Incorporated (delaware) Dba Wiring Device-Kellems Division

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-549-5138?

   The FSCG of the NSN 5935-00-549-5138 is 5935

2. Does the NSN 5935-00-549-5138 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-549-5138 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-549-5138 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-549-5138 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-549-5138 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963