NSN Q4110 CMPD560CD

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

5330-01-454-1815, preformed packing.

NSN 5330-01-454-1815 Datasheet

(NSN) National Stock Number

5330-01-454-1815

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-454-1815

Requires Demilitarization

Yes

(INC) Item Name Code

04521

Date

Sat, Mar 21, 1998

Schedule B Code

3926904500

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004521

Cross Reference

CAGE Codes

24617

General Motors Corp

U.s./canadian manufacturers

34228

L3 Technologies, Inc. Div L3 Keo

U.s./canadian manufacturers

89536

Fluke Corp

U.s./canadian manufacturers

07322

Minnesota Rubber Co

U.s./canadian manufacturers

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-01-454-1815?

   The FSCG of the NSN 5330-01-454-1815 is 5330

2. Does the NSN 5330-01-454-1815 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5330-01-454-1815 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-01-454-1815 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5330-01-454-1815 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-01-454-1815 was assigned to the Federal Catalog?

   It was assigned 28 years ago, on Sat, Mar 21, 1998