NSN Q7153

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

unable to decode accuracy in percent, white single indicator single range background color, 2 threaded stud circuit attachment method and quantity, 4.000 inches nominal center to center distance between mounting facilities parallel to length, 3.562 inches nominal center to center distance between mounting facilities parallel to width.

NSN 6625-00-586-5071 Datasheet

(NSN) National Stock Number

6625-00-586-5071

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-586-5071

Requires Demilitarization

Yes

(INC) Item Name Code

16450

Date

Fri, Mar 31, 1972

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Center To Center Distance Between Mounting Facilities Parallel To Width

3.562 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Length

4.000 inches nominal

Circuit Attachment Method And Quantity

2 threaded stud

Circuit Current For Which Designed

dc

Dial Scale Marking Color

unable to decode

Installation Design

panel

Material

plastic

Measurement Range

unable to decode

Meter Body Diameter Behind Mounting Flange

2.750 inches nominal

Meter Depth Behind Mounting Flange

1.390 inches nominal

Mounting Arrangement Style

four hole/stud rectangular/square

Mounting Facility Type And Quantity

4 flange

Overall Height

4.070 inches nominal

Overall Width

4.550 inches nominal

Style Designator

rectangular flush mtg

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016450

Cross Reference

CAGE Codes

60741

Triplett (bluffton) Corporation Dba Lfe Instruments

U.s./canadian manufacturers

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

25497

Metermaster Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34540

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061620

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-586-5071?

   The FSCG of the NSN 6625-00-586-5071 is 6625

2. Does the NSN 6625-00-586-5071 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-586-5071 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-00-586-5071 contain precious materials?

   Precious metal content is unknown

5. Does NSN 6625-00-586-5071 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-586-5071 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Mar 31, 1972