NSN R1L-E2A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.1% of reading +/- two counts on all ranges single indicator all ranges accuracy rating, 3-1/2 display digit quantity, ac or dc circuit current for which designed, 2 wire lead circuit attachment method and quantity, gray/grey single indicator all ranges display color.

NSN 6625-01-527-5543 Datasheet

(NSN) National Stock Number

6625-01-527-5543

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-527-5543

Requires Demilitarization

Yes

(INC) Item Name Code

00494

Date

Tue, Feb 8, 2005

Schedule B Code

9030908030

Accuracy Rating

0.1% of reading +/- two counts on all ranges single indicator all ranges

Circuit Attachment Method And Quantity

2 wire lead

Circuit Current For Which Designed

ac or dc

Display Color

gray/grey single indicator all ranges

Display Digit Quantity

3-1/2

Display Type

liquid crystal

Environmental Protection

dust resistant and waterproof

Furnished Items And Quantity

"one pair test probes: heavy duty pistol grip probes, each with two durable hardened tips which rotate when pressed against the surface to be tested. each probe comes with right feet of number 12 awg two-wire cable with color coded spade lugs. three atex approved alkaline "d" cells, operations and maintenance manual."

Indicator Type

digital display

Installation Design

bench

Measurement Range

+0.0 to 199.9 ohms single indicator all ranges

Overall Depth

7.100 inches nominal

Overall Length

17.500 inches nominal

Overall Width

11.500 inches nominal

Power Source

internal

Scale Selection Method

switch

Special Test Features

certifications include;u1913;csa e79-0;csa e79-11;ce certified;atex directive (94/9/eec);en 50014,1997 edition, including amendment 2;en 50020, 2002 edition;en 50284, 1999 edition; en61326, 1997 edition including amendment 1;1998 and amendment 2:2001;explosive atmosphere per mil-pre-28800f

Style Designator

portable

Special Features

the ppm model r1l-e2 is a portable ohmmeter designed to measure low values of resistance, from 1 micro ohm to 20 ohms, in expolsive atmosphers. applications include aircraft fuel tank, fuel storage and transportation line bond testing

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000494

Cross Reference

CAGE Codes

29504

P P M, Inc.

U.s./canadian manufacturers

49374

Tegam, Inc.

U.s./canadian manufacturers

4K0V2

Integrated Procurement Technologies

Non-manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

D - 200.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

33190

Water Commodity

671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems)

National Motor Freight Classification Item Number

058280

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-527-5543?

   The FSCG of the NSN 6625-01-527-5543 is 6625

2. Does the NSN 6625-01-527-5543 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-527-5543 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-527-5543 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-527-5543 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-527-5543 was assigned to the Federal Catalog?

   It was assigned 21 years ago, on Tue, Feb 8, 2005