NSN RB08-X

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

8 accommodated contact quantity, octal .687 inch contact position arrangement style, 1.688 inches nominal distance between mounting facility centers, 10.0 contact maximum current rating in amps, top mount body style.

NSN 5935-01-013-3356 Datasheet

(NSN) National Stock Number

5935-01-013-3356

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-013-3356

Requires Demilitarization

Yes

(INC) Item Name Code

28914

Date

Mon, Dec 1, 1975

Schedule B Code

8536695050

Accommodated Contact Quantity

8

Body Style

top mount

Contact Position Arrangement Style

octal .687 inch

Contact Maximum Current Rating In Amps

10.0

Distance Between Mounting Facility Centers

1.688 inches nominal

Mounting Hole Diameter

0.173 inches nominal

Mounting Method

unthreaded hole(s)

Mounting Hole Style

two mounting holes/slots, in-line

Mounting Type For Which Designed

chassis

Overall Diameter

2.000 inches nominal

Overall Height

0.625 inches nominal

Polarization Type

center key hole

Terminal Type And Quantity

8 tab w/screw

Body Material

unable to decode

Contact Material

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028914

Cross Reference

CAGE Codes

94756

The Boeing Company Div Legacy Boeing Hb1

U.s./canadian manufacturers

98437

Ellis & Watts International, Llc

Non-manufacturers

51107

Diversified Electronics Inc

U.s./canadian manufacturers

52150

Commercial Electric Products Corporation

U.s./canadian manufacturers

54173

Custom Connector Corp

U.s./canadian manufacturers

55438

Goodrich Lighting Systems Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-013-3356?

   The FSCG of the NSN 5935-01-013-3356 is 5935

2. Does the NSN 5935-01-013-3356 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-013-3356 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-013-3356 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-013-3356 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-013-3356 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Mon, Dec 1, 1975