NSN RF6689

A straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.

straight shape, external coupling body style, 0.250 inches nominal bushing diameter, contact material document and classification, 0.310 inches minimum and 0.314 inches maximum center to center distance between mounting facilities parallel to height, externally threaded shell connector locking method.

NSN 5935-00-341-0324 Datasheet

(NSN) National Stock Number

5935-00-341-0324

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-341-0324

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Wed, Jan 9, 1974

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Bushing Diameter

0.250 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Height

0.310 inches minimum and 0.314 inches maximum

Connector Locking Method

externally threaded shell

Contact Material Document And Classification

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Surface Treatment

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.310 inches minimum and 0.314 inches maximum

Environmental Protection

shock resistant and vibration resistant and weatherproof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Nominal Thread Size

0.250 inches and 0.086 inches

Overall Height

0.422 inches minimum and 0.454 inches maximum

Overall Length

0.542 inches minimum and 0.582 inches maximum

Overall Width

0.422 inches minimum and 0.454 inches maximum

Precious Material And Location

contact gold and contact and shell surfaces silver

Precious Material And Weight

0.105 gold grains, troy and 0.105 silver grains, troy

Precious Material

gold and silver

Radio Frequency Type Contact Characteristic Impedance In Ohms

unable to decode

Shell Material Document And Classification

qq-b-626 fed spec single material response or qq-b-613 fed spec single material response

Shell Material

copper alloy

Shell Surface Treatment

gold and silver

Shell Type

solid

Special Features

contact designation tsm

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Series Designator

unef and unified national coarse (unc)

Threaded Device Type

coupling facility and mounting hole

Unthreaded Mounting Hole Diameter

0.086 inches minimum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

99971

Lockheed Martin Corp Naval Electronics & Surveillance Systems

U.s./canadian manufacturers

94375

Lax Electronics, Inc. Dba Automatic Connector Div Automatic Connector

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-00-341-0324?

   The FSCG of the NSN 5935-00-341-0324 is 5935

2. Does the NSN 5935-00-341-0324 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-00-341-0324 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-341-0324 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-00-341-0324 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-341-0324 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Wed, Jan 9, 1974