NSN S357-2216A1-5A2

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

retaining ring furnished items, aluminum alloy material, 0.562 inches minimum and 0.938 inches maximum cable opening diameter, 1 threaded coupling mounting facility type and quantity, 1 cable opening quantity.

NSN 5935-00-481-8190 Datasheet

(NSN) National Stock Number

5935-00-481-8190

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-481-8190

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Fri, Sep 11, 1970

Schedule B Code

8548900100

Cable Opening Diameter

0.562 inches minimum and 0.938 inches maximum

Cable Opening Quantity

1

Furnished Items

retaining ring

Material

aluminum alloy

Mounting Facility Type And Quantity

1 threaded coupling

Nominal Thread Length

0.750 inches

Nominal Thread Size

1.312 inches

Overall Height

1.657 inches minimum and 1.719 inches maximum

Overall Width

1.375 inches minimum and 1.437 inches maximum

Seal Type

preformed packing

Size Designation

22

Style Designator

straight type w/cable clamp

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Seal Material

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

91605

Citation Products Co

U.s./canadian manufacturers

1FH08

Lehigh Armstrong Inc

Non-manufacturers

07418

Joslyn Sunbank Company, Llc Dba Joslyn Sunbank Co Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-481-8190?

   The FSCG of the NSN 5935-00-481-8190 is 5935

2. Does the NSN 5935-00-481-8190 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-481-8190 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-481-8190 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-481-8190 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-481-8190 was assigned to the Federal Catalog?

   It was assigned 56 years ago, on Fri, Sep 11, 1970