NSN S418562F4005

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

11.650 inches overall height, unable to decode length of shaft from housing, 2 threaded hole(s) mounting facility type and quantity, pad mounting method, unable to decode frequency in hertz.

NSN 6105-01-461-8917 Datasheet

(NSN) National Stock Number

6105-01-461-8917

(FSG) Federal Supply Group

61 - Electric Wire, and Power and Distribution Equipment

(FSC) Federal Supply Classification

6105 - Electrical Motors

(NIIN) National Item Identification Number

01-461-8917

Requires Demilitarization

Yes

(INC) Item Name Code

00530

Date

Mon, Jan 11, 1999

Frequency In Hertz

unable to decode

Length Of Shaft From Housing

unable to decode

Mounting Facility Type And Quantity

2 threaded hole(s)

Mounting Method

pad

Overall Height

11.650 inches

Overall Length

13.760 inches

Overall Width

9.360 inches

Power Rating

unable to decode

Rotor Speed Rating In Rpm

1800.0 single no load

Shaft Rotation Direction

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000530

Cross Reference

CAGE Codes

61802

Toshiba International Corporation Dba Toshiba International Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34760

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

062120

Questions & Answers

1. What is the FSCG of the NSN 6105-01-461-8917?

   The FSCG of the NSN 6105-01-461-8917 is 6105

2. Does NSN 6105-01-461-8917 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6105-01-461-8917 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6105-01-461-8917 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 6105-01-461-8917 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Mon, Jan 11, 1999