NATO Stock Number
5905-00-249-5994
Sold in multiples of
1 EA
DEMIL
NO
Section Quantity
1
Body Style
Cylindrical bushing mounted
Overall Length
Between 2.620 inches and 2.870 inches
Shaft Diameter
Between 0.248 inches and 0.250 inches
Shaft Length
Between 0.780 inches and 0.840 inches
Mounting Bushing Length
Between 0.290 inches and 0.330 inches
Body Length
Between 1.870 inches and 2.030 inches
Overall Diameter
2.170 inches
Shaft Style
Round
Shaft Bearing Type
Sleeve
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
3600.0
Maximum Starting Torque
3.00 inch-ounces
Maximum Running Torque
3.00 inch-ounces
Maximum Stop Torque
550.00 inch-ounces
Nonturn Device Location
At 6 oclock
Nonturn Device Radius
Between 0.552 inches and 0.572 inches
Shaft End Play
0.00500 inches
Shaft Runout
0.0005 inches
Lateral Runout
0.003 inches
Pilot Diameter Runout
0.00200 inches
Shaft Radial Play
0.003 inches
Screw Thread Diameter
0.375 inches
Screw Thread Series Designator
Unef
Screw Thready Qty Per Inch (tpi)
32.0
Mounting Method
Standard bushing
Electrical Resistance Per Section
100.000 ohms single section
Rotary Actuator Travel In Angular Deg
3600.0
Function Conformity Tolerance Per Section
-0.25/+0.25 single section
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
85.0 single section
Power Dissipation Rating Per Section In Watts
5.0 free air single section
Function Conformity Per Section
Single section independent linearity
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section
Actuator Travel Control Feature
Stops
Function Characteristic Per Section
Single section linear
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0/+20.0 single section
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
40.0 single section
Test Data Document
07217-629860 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
3 tab, solder lug