NSN SCB85125

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

1.000 inches nominal overall length, 0.312 inches maximum cable opening diameter, 1 cable opening quantity, 4 unthreaded hole(s) mounting facility type and quantity, 0.438 inches nominal overall diameter.

NSN 5935-00-295-3376 Datasheet

(NSN) National Stock Number

5935-00-295-3376

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-295-3376

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Tue, Jan 1, 1963

Schedule B Code

8548900100

Cable Opening Quantity

1

Cable Opening Diameter

0.312 inches maximum

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Overall Diameter

0.438 inches nominal

Overall Length

1.000 inches nominal

Overall Width

1.000 inches nominal

Unthreaded Mounting Hole Diameter

0.125 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

79500

Westinghouse Electric Corp

U.s./canadian manufacturers

07886

Dar Electronics Inc Commercial Products Div Dba National Radio Co

U.s./canadian manufacturers

71313

Viking Technologies, Ltd.

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-295-3376?

   The FSCG of the NSN 5935-00-295-3376 is 5935

2. Does the NSN 5935-00-295-3376 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-295-3376 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-295-3376 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-295-3376 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-295-3376 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963