NSN SCC32018

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.312 inches nominal cable entrance diameter, 2.108 inches nominal body length, black identification code color, insulated completely electrical insulation feature, straight handle body style.

NSN 5935-00-192-4776 Datasheet

(NSN) National Stock Number

5935-00-192-4776

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-192-4776

Requires Demilitarization

Yes

(INC) Item Name Code

00178

Date

Tue, Jan 1, 1963

Schedule B Code

8517700000

Body Length

2.108 inches nominal

Body Style

straight handle

Cable Entrance Diameter

0.312 inches nominal

Electrical Insulation Feature

insulated completely

Identification Code Color

black

Overall Diameter

0.542 inches nominal

Overall Length

3.250 inches nominal

Terminal Type

screw

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000178

Cross Reference

CAGE Codes

06KW9

Lucent Technologies Inc Dba Federal Marketing Group

U.s./canadian manufacturers

3B4M0

Lucent Technologies Inc Corporate Headquarters

Non-manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

70408

At and T Corp

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-192-4776?

   The FSCG of the NSN 5935-00-192-4776 is 5935

2. Does the NSN 5935-00-192-4776 have a Schedule B code assigned?

   Yes, the Schedule B code is 8517700000

3. Does NSN 5935-00-192-4776 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-192-4776 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-192-4776 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-192-4776 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963