1. Home /
  2. FSC NSN Catalog /
  3. Electrical Insulators and Insulating Materials /
  4. SCD20719ITEM2

NSN SCD20719ITEM2

Bushing Insulator

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

2.750 inches nominal outside diameter, 2.875 inches nominal overall height, 1.968 inches nominal shank outside diameter, 1.250 inches nominal shank length, green identification code color.

NSN 5970-00-285-0261 Datasheet

(NSN) National Stock Number
5970-00-285-0261
(NIIN) National Item Identification Number
00-285-0261
Requires Demilitarization
Yes
(INC) Item Name Code
18301
Date
Tue, Jan 1, 1963
Schedule B Code
8546900000
Identification Code Color
green
Outside Diameter
2.750 inches nominal
Overall Height
2.875 inches nominal
Shank Outside Diameter
1.968 inches nominal
Shank Length
1.250 inches nominal
Top Diameter
1.500 inches nominal
Material And Location
unable to decode

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0018301

Cross Reference

CAGE Codes

80063
Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
W - Rating variable
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
53360
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
National Motor Freight Classification Item Number
103300

Schedule B & Trade

Schedule B
8546-90-0000
Description
electrical insulators, nesoi
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77324
(NAICS) North American Industrial Classification System
335932

Questions & Answers

  1. What is the FSCG of the NSN 5970-00-285-0261?

    The FSCG of the NSN 5970-00-285-0261 is 5970

  2. Does the NSN 5970-00-285-0261 have a Schedule B code assigned?

    Yes, the Schedule B code is 8546900000

  3. Does NSN 5970-00-285-0261 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5970-00-285-0261 contain precious materials?

    Item does not contain precious metal.

  5. Does NSN 5970-00-285-0261 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5970-00-285-0261 was assigned to the Federal Catalog?

    It was assigned 63 years ago, on Tue, Jan 1, 1963

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.