NSN SE52E1812E-4

A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also rod, threaded end and rod, continuous thread.

clamp furnished items, aluminum alloy material, 0.500 inches minimum and 0.750 inches maximum cable opening diameter, 1 cable opening quantity, 90.0 body angle in deg.

NSN 5935-01-017-1840 Datasheet

(NSN) National Stock Number

5935-01-017-1840

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-017-1840

Requires Demilitarization

Yes

(INC) Item Name Code

67169

Date

Thu, Mar 4, 1976

Schedule B Code

8548900100

Body Angle In Deg

90.0

Cable Opening Diameter

0.500 inches minimum and 0.750 inches maximum

Cable Opening Quantity

1

Furnished Items

clamp

Material

aluminum alloy

Mounting Facility Type And Quantity

2 threaded coupling

Nominal Thread Size

1.062 inches and 1.188 inches

Overall Width

1.688 inches nominal

Seal Type

preformed packing

Size Designation

18

Style Designator

angle type

Surface Treatment

cadmium

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Seal Material

unable to decode and unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067169

Cross Reference

CAGE Codes

19315

Honeywell Intl Inc Defense Avionics Systems Former Bendix Navigation and Control Systems

U.s./canadian manufacturers

55974

Honeywell Intl Inc Defense Avionics Systems Former Test Systems Div

U.s./canadian manufacturers

07418

Joslyn Sunbank Company, Llc Dba Joslyn Sunbank Co Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

743 - Electrical cable

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-017-1840?

   The FSCG of the NSN 5935-01-017-1840 is 5935

2. Does the NSN 5935-01-017-1840 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-017-1840 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-017-1840 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-017-1840 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-017-1840 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Thu, Mar 4, 1976