NSN SM11-20SSLGDF

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5.0 single mating end single contact grouping contact maximum current rating in amps, nonremovable single mating end single contact grouping contact removability, 11 single mating end contact position arrangement style, jackscrew-socket connector locking method, straight shape w/screw locks body style.

NSN 5935-01-044-3609 Datasheet

(NSN) National Stock Number

5935-01-044-3609

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-044-3609

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Mon, Jul 11, 1977

Schedule B Code

8536695050

Body Style

straight shape w/screw locks

Connector Locking Method

jackscrew-socket

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Current Rating In Amps

5.0 single mating end single contact grouping

Contact Position Arrangement Style

11 single mating end

Contact Surface Treatment

gold single mating end single contact grouping

Environmental Protection

moisture resistant and vibration resistant and salt water resistant

Included Contact Quantity

11 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Material

plastic diallyl phthalate single mating end

Mating End Quantity

1

Nominal Thread Size

0.086 inches

Overall Height

0.590 inches nominal

Overall Length

0.870 inches nominal

Overall Width

0.340 inches nominal

Polarization Method

jackscrew

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.011 gold grains, troy

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

81413

Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems

U.s./canadian manufacturers

03877

Gilbert Engineering Co Inc/incon Sub of Transitron Electronic Corp

U.s./canadian manufacturers

95238

Winchester Interconnect Corporation Dba Winchester Interconnect Div Winchester Interconnect Rf Corporation

U.s./canadian manufacturers

97954

U S Components Inc

U.s./canadian manufacturers

91637

Vishay Dale Electronics, Llc Div Vishay Americas

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-044-3609?

   The FSCG of the NSN 5935-01-044-3609 is 5935

2. Does the NSN 5935-01-044-3609 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-044-3609 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-044-3609 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-044-3609 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-044-3609 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Mon, Jul 11, 1977