NATO Stock Number
5905-01-261-6427
Sold in multiples of
1 EA
DEMIL
NO
Reliability Indicator
Not established
Terminal Surface Treatment
Solder
Terminal Length
1.200 inches
Body Length
0.300 inches
Body Outside Diameter
0.105 inches
Terminal Diameter
Between 0.017 inches and 0.023 inches
Maximum Power Dissipation Rating
125.00 milliwatts
Ambient Tempurature At Full Rated Power
100.0 degrees celsius
Maximum Operating Temp
125.0 degrees celsius
Thermal Time Constant In Seconds
40.0
Tempurature Points For Resistance Readings At Zero Power
-37.0 degrees celsius 1st resistance-temperature point
Tempurature Points For Resistance Readings At Zero Power
-5.0 degrees celsius 2nd resistance-temperature point
Tempurature Points For Resistance Readings At Zero Power
55.0 degrees celsius 3rd resistance-temperature point
Tempurature Points For Resistance Readings At Zero Power
85.0 degrees celsius 4th resistance-temperature point
Zero Power Resistance At Specificationified Temp
600.0 ohms 1st resistance-temperature point
Zero Power Resistance At Specificationified Temp
770.0 ohms 2nd resistance-temperature point
Zero Power Resistance At Specificationified Temp
1.274 kilohms 3rd resistance-temperature point
Zero Power Resistance At Specificationified Temp
1.538 kilohms 4th resistance-temperature point
Resistance Tolerance At A Specificationified Tempurature In Percent
-3.0/+3.0 2nd resistance-temperature point
Resistance Tolerance At A Specificationified Tempurature In Percent
-3.0/+3.0 3rd resistance-temperature point
Resistance Tolerance At A Specificationified Tempurature In Percent
-5.0/+5.0 4th resistance-temperature point
Resistance Tolerance At A Specificationified Tempurature In Percent
-7.0/+7.0 1st resistance-temperature point
Inclosure Type
Encapsulated
Zero Power Resistance
1.000 kilohms
Zero Power Resistance Tolerance In Percent At Reference Temp
-1.0/+1.0
Reference Tempurature In Deg Celsius
25.0
Style Designator
Rod
Test Data Document
30003-917as8779 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
2 wire lead
