NSN ST18A

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1.031 inches maximum body length, 0.688 inches nominal actuator height, 0.110 inches nominal actuator diameter, up position maintained and down position maintained actuator position-action relationship, round actuator style.

NSN 5930-00-296-9050 Datasheet

(NSN) National Stock Number

5930-00-296-9050

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-296-9050

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Tue, Jan 1, 1963

Schedule B Code

8536509065

Actuator Height

0.688 inches nominal

Actuator Diameter

0.110 inches nominal

Actuator Position-Action Relationship

up position maintained and down position maintained

Actuator Style

round

Body Length

1.031 inches maximum

Body Style

bushing mount

Body Width

0.531 inches maximum

Bushing Length

0.469 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

10.000 amperes resistive dc and 5.000 amperes inductive dc and 3.000 amperes lamp dc and 3.000 amperes resistive ac and 1.500 amperes inductive ac

Hazardous Locations/Environmental Protection

dustproof

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

250.0 ac and 30.0 dc

Mounting Method

threaded bushing

Mounting Surface To Terminal End Distance

0.844 inches maximum

Nominal Thread Size

0.469 inches

Nonpile-Up Contact Arrangement

1 pole, single throw, both positions maintained single switch unit

Terminal Type And Quantity

2 tab, solder lug

Thread Quantity Per Inch

32

Thread Series Designator

uns

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

94931

Bendix Corp the Bendix International Div

U.s./canadian manufacturers

3B150

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

81350

Joint Army-Navy Specifications Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-296-9050?

   The FSCG of the NSN 5930-00-296-9050 is 5930

2. Does the NSN 5930-00-296-9050 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-296-9050 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-296-9050 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-296-9050 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-296-9050 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963