NSN STC520-4

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

2 screw circuit attachment method and quantity, dc circuit current for which designed, white single indicator single range background color, unable to decode accuracy in percent, unable to decode dial scale marking color.

NSN 6625-00-053-7968 Datasheet

(NSN) National Stock Number

6625-00-053-7968

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-053-7968

Requires Demilitarization

Yes

(INC) Item Name Code

28455

Date

Sat, May 20, 1967

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Circuit Attachment Method And Quantity

2 screw

Circuit Current For Which Designed

dc

Dial Scale Marking Color

unable to decode

Installation Design

panel

Measurement Range

unable to decode

Meter Body Diameter Behind Mounting Flange

2.800 inches nominal

Meter Depth Behind Mounting Flange

1.250 inches nominal

Mounting Facility Type And Quantity

1 flange

Operating Voltage Rating In Volts

0.0375 dc nominal

Overall Diameter

3.495 inches nominal

Scale Division Quantity

unable to decode

Special Features

red line at 150 kw

Style Designator

round flush mtg

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028455

Cross Reference

CAGE Codes

98749

Sacramento Air Logistics Center Sm-Alc/liil

U.s./canadian manufacturers

33005

Jewell Instruments Llc

U.s./canadian manufacturers

81381

Stewart & Stevenson Power Products Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HQ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

J - 100.0

National Motor Freight Class Rating

H - 110.0

Special Handling

Q - High sensitivity, category ii, aa&e, classified confidential

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

00000

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

136750

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-053-7968?

   The FSCG of the NSN 6625-00-053-7968 is 6625

2. Does the NSN 6625-00-053-7968 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-053-7968 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-00-053-7968 contain precious materials?

   Precious metal content is unknown

5. Does NSN 6625-00-053-7968 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-053-7968 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Sat, May 20, 1967