NSN SW-2002

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

straight shape body style, 2 mating end quantity, ps/2 to usb converter part name assigned by controlling agency, haxmat id & mngt system end item identification, push-pull connector locking method.

NSN 5935-01-539-7248 Datasheet

(NSN) National Stock Number

5935-01-539-7248

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-539-7248

Requires Demilitarization

Yes

(INC) Item Name Code

15091

Date

Mon, May 1, 2006

Schedule B Code

8548900100

End Item Identification

haxmat id & mngt system

Body Style

straight shape

Connector Locking Method

push-pull

Part Name Assigned By Controlling Agency

ps/2 to usb converter

Mating End Quantity

2

Special Features

adapter converts the ps/2 port receptacle to a usb port connection, for computers; uses can be keyboard/mouse.

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015091

Cross Reference

CAGE Codes

25014

Cole-Sewell Corp

U.s./canadian manufacturers

38UZ7

Sewell Development Corporation Dba Sewell Direct

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-01-539-7248?

   The FSCG of the NSN 5935-01-539-7248 is 5935

2. Does the NSN 5935-01-539-7248 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-539-7248 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-539-7248 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-539-7248 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-539-7248 was assigned to the Federal Catalog?

   It was assigned 20 years ago, on Mon, May 1, 2006