NSN TA-RT1004A1-E03B905

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

knolls atomic power lab - special project management system end item identification, top, bulb, capily assy part name assigned by controlling agency.

NSN 6685-01-578-7649 Datasheet

(NSN) National Stock Number

6685-01-578-7649

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6685 - Humidity Measuring and Controlling Instruments, Temperature and Pressure

(NIIN) National Item Identification Number

01-578-7649

Requires Demilitarization

Yes

(INC) Item Name Code

47793

Date

Tue, Oct 20, 2009

End Item Identification

knolls atomic power lab - special project management system

Part Name Assigned By Controlling Agency

top, bulb, capily assy

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0047793

Cross Reference

CAGE Codes

73475

Schneider Electric Systems Usa Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

VQ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

46330

Water Commodity

704 - Glass or glass items

National Motor Freight Classification Item Number

087810

Questions & Answers

1. What is the FSCG of the NSN 6685-01-578-7649?

   The FSCG of the NSN 6685-01-578-7649 is 6685

2. Does NSN 6685-01-578-7649 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6685-01-578-7649 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6685-01-578-7649 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6685-01-578-7649 was assigned to the Federal Catalog?

   It was assigned 16 years ago, on Tue, Oct 20, 2009