NSN THJ4V2602A

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

3.812 inches nominal body height, 10.125 inches nominal body length, 8.250 inches nominal body width, multipole-single actuator type body style, 0.500 inches nominal boss height.

NSN 5925-01-207-5008 Datasheet

(NSN) National Stock Number

5925-01-207-5008

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-207-5008

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Thu, May 2, 1985

Schedule B Code

8536200040

Body Height

3.812 inches nominal

Body Length

10.125 inches nominal

Body Style

multipole-single actuator type

Body Width

8.250 inches nominal

Boss Height

0.500 inches nominal

Center To Center Distance Between Terminals Parallel To Length

9.120 inches nominal

Center To Center Distance Between Terminals Parallel To Width

2.750 inches nominal

Circuit Protection Type

undervoltage all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

7.875 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

2.750 inches nominal

End Item Identification

used onboard 110 ft wpb coast guard vessels

Frequency In Hertz

60.0 all locations

Main Contact Tripping Mechanism Type

trip free

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

200.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

220.0 ac all locations

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Operating Voltage Type And Rating Per Pole In Volts

600.0 ac all locations

Pole Quantity

3

Reset Method

manual

Terminal Type And Quantity

6 compression

Trip Release Characteristic

instantaneous all locations

Trip Release Method

solid state all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

110.0 all locations

Ultimate Trip Time Per Pole In Seconds

3.000 nominal all locations

Unthreaded Mounting Hole Diameter

0.410 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

03497

General Electric Co Outdoor Breaker Business Section

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-207-5008?

   The FSCG of the NSN 5925-01-207-5008 is 5925

2. Does the NSN 5925-01-207-5008 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-207-5008 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-207-5008 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-207-5008 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-207-5008 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Thu, May 2, 1985