NSN UDM5014

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

automatic start-stop control device type, air compressor cooling medium, single cooling system design, 1.5 horsepower brake power required, 1 compressor quantity.

NSN 4310-00-640-5826 Datasheet

(NSN) National Stock Number

4310-00-640-5826

(FSG) Federal Supply Group

43 - Pumps and Compressors

(FSC) Federal Supply Classification

4310 - Compressors and Vacuum Pumps

(NIIN) National Item Identification Number

00-640-5826

Requires Demilitarization

Yes

(INC) Item Name Code

29301

Date

Tue, Jan 1, 1963

Schedule B Code

8414809000

Brake Power Required

1.5 horsepower

Compressor Cooling Medium

air

Compressor Quantity

1

Control Device Type

automatic start-stop

Cooling System Design

single

Cylinder Arrangement Style

vertical design

Cylinder Quantity

1

Discharge Flow Rate

6.000 cubic feet per minute

Discharge Pressure

100.000 pounds per square inch gage

Frequency In Hertz

60.0

Gas For Which Designed

air

Phase

single

Mounting Type

horizontal tank

Prime Mover Cooling Medium

air

Prime Mover Type

electric motor

Reciprocating Compressor Design

single acting

Receiver Tank Capacity

8.00 cubic feet

Silencer Type

inlet

Stage Quantity

1

Unloader Type

automatic

Voltage In Volts And Current Type

110.0 ac or 220.0 ac

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0029301

Cross Reference

CAGE Codes

17431

Illinois Tool Works Inc.

U.s./canadian manufacturers

88777

Champion Spark Plug Co Devilbiss Co Div

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

60340

Water Commodity

594 - Pumps and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

118100

Schedule B & Trade

Schedule B

8414-80-9000

Description

air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether fitted with filters, nesoi

End Use

21100 - Industrial engines

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74319

(NAICS) North American Industrial Classification System

333912

Questions & Answers

1. What is the FSCG of the NSN 4310-00-640-5826?

   The FSCG of the NSN 4310-00-640-5826 is 4310

2. Does the NSN 4310-00-640-5826 have a Schedule B code assigned?

   Yes, the Schedule B code is 8414809000

3. Does NSN 4310-00-640-5826 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 4310-00-640-5826 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 4310-00-640-5826 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 4310-00-640-5826 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963