- Home /
- FSC NSN Catalog /
- Capacitors /
- ULB1E4R7M
NSN ULB1E4R7M
Electrolytic Fixed Capacitor
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.
5910-01-186-5096, electrolytic fixed capacitor.
NSN 5910-01-186-5096 Datasheet
- (NSN) National Stock Number
- 5910-01-186-5096
- (FSG) Federal Supply Group
- 59 - Electrical and Electronic Equipment Components
- (FSC) Federal Supply Classification
- 5910 - Capacitors
- (NIIN) National Item Identification Number
- 01-186-5096
- Requires Demilitarization
- Yes
- (INC) Item Name Code
- 00008
- Date
- Fri, Aug 10, 1984
- Schedule B Code
- 8532290040
Identification
- Demilitarization Code
- A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Precious Metals Indicator
- A - Item does not contain precious metal.
- Hazardous Metals Indicator
- P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
- Pseudo Item Name Code
- 0000008
Cross Reference
CAGE Codes
- 18222
-
Epi Printers, Inc. Div Business DevelopmentNon-manufacturers
- 55680
-
Nichicon America CorpU.s./canadian manufacturers
Freight Information
- Air Commodity
- HZ -
- Air Dimension
- A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- National Motor Freight Class Rating
- P - 77.5
- Special Handling
- 9 - Other or no special handling required (sh)
- Type of Cargo
- Z - No special type of cargo code applicable
- Uniform Freight Classification Item Number
- 34450
- Water Commodity
- 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
- National Motor Freight Classification Item Number
- 061400
Schedule B & Trade
- Schedule B
- 8532-29-0040
- Description
- fixed capacitors, nesoi
- End Use
- 20005 - Electric apparatus
- Unit of Quantity
- NO
- USDA
- Yes
- (SITC) Standard International Trade Classification
- 77867
- (NAICS) North American Industrial Classification System
- 334416
Questions & Answers
-
What is the FSCG of the NSN 5910-01-186-5096?
The FSCG of the NSN 5910-01-186-5096 is 5910
-
Does the NSN 5910-01-186-5096 have a Schedule B code assigned?
Yes, the Schedule B code is 8532290040
-
Does NSN 5910-01-186-5096 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
-
Does NSN 5910-01-186-5096 contain precious materials?
Item does not contain precious metal.
-
Does NSN 5910-01-186-5096 contain hazardous materials?
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
-
When the NSN 5910-01-186-5096 was assigned to the Federal Catalog?
It was assigned 42 years ago, on Fri, Aug 10, 1984
Pricing & Availability
Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.
Stock Checks
-
5310-00-877-562210/14/2026 08:10 PM EDTHexagon Self-Locking Nut6,098 in stock
-
5320-01-168-638610/14/2026 08:10 PM EDTSolid Rivet29,208 in stock
-
4820-01-133-360110/14/2026 08:10 PM EDTInlet Valve1 in stock
-
3120-00-508-357410/14/2026 08:10 PM EDTSleeve Bushing55 in stock
-
5310-00-475-287210/14/2026 08:10 PM EDTClinch Plain Nut777 in stock
-
5821-01-392-571810/14/2026 08:10 PM EDTRadio Receiver-Transmitter2 in stock
-
5940-01-122-148510/14/2026 08:10 PM EDTConductor Splice476 in stock
-
2610-00-424-989810/14/2026 08:10 PM EDTVehicu Pneumatic Tire Inner Tube6 in stock
-
3040-01-263-228810/14/2026 04:10 PM EDTShouldered Shaft1 in stock
-
5320-01-258-605810/14/2026 04:10 PM EDTBlind Rivet12,890 in stock
-
5307-01-158-170710/14/2026 04:10 PM EDTSpecial Stud995 in stock
-
5306-01-044-220110/14/2026 04:10 PM EDTEye Bolt2 in stock
-
5950-01-375-511410/14/2026 04:10 PM EDTPower Transformer5 in stock
-
5930-01-480-979910/14/2026 04:10 PM EDTToggle Switch1 in stock
-
4510-00-252-688810/14/2026 04:10 PM EDTDouble Faucet438 in stock
Recent Updates
-
6210-00-008-550610/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
6210-00-008-550710/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
6210-00-008-550810/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
6210-00-008-550410/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
6210-00-008-550510/13/2026 08:10 AM EDTLight LensIn Indoor and Outdoor Electric Lighting Fixtures
-
1660-00-008-538210/12/2026 08:10 AM EDTHeat Exchanger Valve PistonIn Pressurizing Equipment, Heating and Aircraft Air Conditioning
-
1660-00-008-538310/12/2026 08:10 AM EDTFlat Valve DiaphragmIn Pressurizing Equipment, Heating and Aircraft Air Conditioning
-
4730-00-008-538510/12/2026 08:10 AM EDTPressure Hole PlugIn Hose, Pipe, Tube, Lubrication and Railing Fittings
-
1660-00-008-538610/12/2026 08:10 AM EDTValve Body AssemblyIn Pressurizing Equipment, Heating and Aircraft Air Conditioning
-
1660-00-008-538710/12/2026 08:10 AM EDTCabin Air Valve GuideIn Pressurizing Equipment, Heating and Aircraft Air Conditioning
-
5342-00-007-006710/09/2026 08:10 AM EDTWeapon System Resilient MountIn Weapon System Hardware
-
5330-00-007-007010/09/2026 08:10 AM EDTPacking RetainerIn Packing and Gasket Materials
-
5310-00-007-007610/09/2026 08:10 AM EDTHexagon NutIn Nuts and Washers
-
5310-00-007-007810/09/2026 08:10 AM EDTKey WasherIn Nuts and Washers
-
5935-00-007-075810/09/2026 08:10 AM EDTElectr Receptacle Connector BodyIn Electrical Connectors
Popular Categories
-
FSC 2940Nonaircraft Engine Air and Oil Filters, Strainers and Cleaners
-
FSC 6510Surgical Dressing Materials
-
FSC 1430Guided Missile Remote Control Systems
-
FSC 7810Athletic and Sporting Equipment
-
FSC 9640Iron and Steel Primary and Semifinished Products
-
FSC 1140Nuclear Components
-
FSC 6220Electric Vehicular Lights and Fixtures
-
FSC 5841Airborne Radar Equipment
-
FSC 2340Bicycles, Motor Scooters and Motorcycles
-
FSC 5640Thermal Insulation Materials, Building Paper and Wallboard
-
FSC 9540Nonferrous Base Metal Structural Shapes
-
FSC 9999Miscellaneous Items
-
FSC 5342Weapon System Hardware
-
FSC 3110Unmounted Antifriction Bearings
-
FSC 4927Repair and Checkout Specialized Equipment Rocket Maintenance