NSN WTB14PR15J

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode contact material, unable to decode contact position arrangement style, contact material document and classification, angle shape, pcb type body style, jackscrew-socket connector locking method.

NSN 5935-01-330-0521 Datasheet

(NSN) National Stock Number

5935-01-330-0521

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-330-0521

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Thu, Nov 29, 1990

Schedule B Code

8538907080

Body Style

angle shape, pcb type

Connector Locking Method

jackscrew-socket

Contact Material Document And Classification

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Surface Treatment Document And Classification

Contact Surface Treatment

Distance Between Mounting Facility Centers

1.292 inches minimum and 1.308 inches maximum

Environmental Protection

humidity resistant and vibration resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material Document And Classification

Insert Material

Mating End Quantity

1

Nominal Thread Size

0.086 inches

Operating Temp Rating

-65.0 celsius minimum and 125.0 celsius maximum

Overall Height

0.550 inches nominal

Overall Length

1.542 inches minimum and 1.558 inches maximum

Overall Width

0.484 inches nominal

Polarization Method

jackscrew

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.014 gold grains, troy

Special Features

jackscrew type-female and location-left hand topandjackscrew type-male and location-right hand bottom

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Quantity Per Inch

56

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.112 inches minimum and 0.128 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

10400

Airborn Interconnect, Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-330-0521?

   The FSCG of the NSN 5935-01-330-0521 is 5935

2. Does the NSN 5935-01-330-0521 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-330-0521 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-330-0521 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-330-0521 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-330-0521 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Nov 29, 1990