NSN XACMS34SF2C010

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

jackscrew-socket connector locking method, unable to decode contact position arrangement style, 0.469 inches nominal distance between centerlines of mounting facilities parallel to body width, rectangular shape body style, 2.703 inches nominal center to center distance between mounting facilities parallel to length.

NSN 5935-01-087-1990 Datasheet

(NSN) National Stock Number

5935-01-087-1990

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-087-1990

Requires Demilitarization

Yes

(INC) Item Name Code

61925

Date

Thu, Dec 13, 1979

Schedule B Code

8538907080

Body Style

rectangular shape

Center To Center Distance Between Mounting Facilities Parallel To Length

2.703 inches nominal

Connector Locking Method

jackscrew-socket

Contact Position Arrangement Style

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.469 inches nominal

Environmental Protection

moisture proof and salt water resistant and shock resistant

Insert Material Document And Classification

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Nominal Thread Size

0.138 inches and 0.112 inches

Overall Width

1.328 inches nominal

Polarization Method

jackscrew and shell

Shell Guide Type And Location Designator

c slot

Shell Material

aluminum alloy

Shell Surface Treatment

anodize

Shell Type

solid

Special Features

items furnished as accessories -mounting plate

Thread Class

2a and 2b

Thread Direction

right-hand

Thread Quantity Per Inch

32 and 40

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

coupling facility and mounting stud

Unthreaded Mounting Hole Diameter

0.125 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0061925

Cross Reference

CAGE Codes

81312

Winchester Interconnect Corporation Dba Winchester Interconnect Div Winchester Interconnect

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-087-1990?

   The FSCG of the NSN 5935-01-087-1990 is 5935

2. Does the NSN 5935-01-087-1990 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-087-1990 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-087-1990 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-01-087-1990 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-087-1990 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Thu, Dec 13, 1979