NSN 170TNC

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

compression nut connector cable strain relief method, internally threaded coupling nut connector locking method, 0.257 inches nominal cable entrance diameter, straight shape, internal coupling body style, copper alloy single mating end single contact grouping contact material.

NSN 5935-00-964-8502 Datasheet

(NSN) National Stock Number

5935-00-964-8502

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-964-8502

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Sun, Jan 1, 1961

Schedule B Code

8536695050

Body Style

straight shape, internal coupling

Cable Entrance Diameter

0.257 inches nominal

Connector Cable Strain Relief Method

compression nut

Connector Locking Method

internally threaded coupling nut

Contact Material

copper alloy single mating end single contact grouping

Contact Position Arrangement Style

tnc single mating end

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts

500.0 single mating end single contact grouping

Contact Surface Treatment

gold and silver single mating end single contact grouping

Environmental Protection

corrosion resistant and humidity resistant and shock resistant and vibration resistant

Included Contact Quantity

1 single mating end single contact grouping

Included Contact Type

coaxial pin single mating end single contact grouping

Insert Material

plastic tetrafluoroethylene single mating end

Mating End Quantity

1

Nominal Thread Size

0.562 inches

Overall Diameter

0.594 inches nominal

Overall Length

1.000 inches nominal

Precious Material And Location

contact surface gold and contact and shell surfaces silver

Precious Material And Weight

0.105 gold grains, troy and 0.105 silver grains, troy

Precious Material

gold and silver

Radio Frequency Type Contact Characteristic Impedance In Ohms

52.0 single mating end single contact grouping

Shell Material

copper alloy

Shell Surface Treatment

silver

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

24

Thread Series Designator

unef

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

95077

Sv Microwave, Inc. Div Sv Microwave

U.s./canadian manufacturers

C1834

Kontron Europe Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

04164

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

3B150

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

49956

Raytheon Company Div Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-964-8502?

   The FSCG of the NSN 5935-00-964-8502 is 5935

2. Does the NSN 5935-00-964-8502 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-964-8502 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-964-8502 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-00-964-8502 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-964-8502 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961