NSN 3310808

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

unable to decode contact removability, friction connector locking method, unable to decode contact surface treatment, unable to decode contact material, 7.800 inches nominal center to center distance between mounting facilities parallel to length.

NSN 5935-01-099-0268 Datasheet

(NSN) National Stock Number

5935-01-099-0268

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-099-0268

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Mon, Aug 11, 1980

Schedule B Code

8538907080

Center To Center Distance Between Mounting Facilities Parallel To Length

7.800 inches nominal

Connector Locking Method

friction

Contact Material

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.000 inches nominal

Environmental Protection

cold resistant and heat resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material Document And Classification

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Overall Height

0.627 inches nominal

Overall Length

8.270 inches minimum and 8.330 inches maximum

Overall Width

1.720 inches minimum and 1.780 inches maximum

Precious Material And Location

contact surfaces gold

Precious Material And Weight

0.160 gold grains, troy

Precious Material

gold

Shell Material Document And Classification

qq-a-250/11 fed spec single material response

Shell Material

aluminum alloy 6061

Shell Surface Treatment Document And Classification

mil-a-8625,cl 2 mil spec single treatment response

Shell Surface Treatment

anodize

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Unthreaded Mounting Hole Diameter

0.198 inches minimum and 0.204 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

59364

Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (west Warner Road)

U.s./canadian manufacturers

77068

Allied-Signal Inc Dba Allied-Signal Aerospace Co Electrodynamics Div

U.s./canadian manufacturers

05041

Dcx-Chol Enterprises, Inc. Dba Masterite Division Div Masterite

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-099-0268?

   The FSCG of the NSN 5935-01-099-0268 is 5935

2. Does the NSN 5935-01-099-0268 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-099-0268 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-099-0268 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-099-0268 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-099-0268 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Mon, Aug 11, 1980