NSN 352003-4

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

straight shape body style, jackscrew-socket connector locking method, unable to decode contact position arrangement style, unable to decode contact removability, unable to decode contact maximum current rating in amps.

NSN 5935-01-068-1634 Datasheet

(NSN) National Stock Number

5935-01-068-1634

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-068-1634

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Thu, Nov 16, 1978

Schedule B Code

8538907080

Body Style

straight shape

Connector Locking Method

jackscrew-socket

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Mounting Facility Centers

1.408 inches nominal

Environmental Protection

heat resistant and moisture proof and vibration proof

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material Document And Classification

unable to decode

Insert Material

unable to decode

Mating End Quantity

1

Nominal Thread Size

0.086 inches and 0.099 inches

Overall Height

0.063 inches nominal

Overall Length

1.630 inches nominal

Overall Width

0.039 inches nominal

Polarization Method

guide pin/socket

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.050 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,type 2,class 1 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

56 and 48

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

mounting stud

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

80249

Bae Systems Information and Electronic Systems Integration Inc.

U.s./canadian manufacturers

81312

Winchester Interconnect Corporation Dba Winchester Interconnect Div Winchester Interconnect

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-068-1634?

   The FSCG of the NSN 5935-01-068-1634 is 5935

2. Does the NSN 5935-01-068-1634 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-068-1634 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-068-1634 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-068-1634 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-068-1634 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Thu, Nov 16, 1978