NSN 438632-2

externally threaded shell connector locking method, 0.040 inches minimum and 0.060 inches maximum bushing diameter, 0.330 inches minimum and 0.350 inches maximum center to center distance between mounting facilities parallel to length, unable to decode contact material, angle shape, external coupling body style.

NSN 5935-01-326-2216 Datasheet

(NSN) National Stock Number

5935-01-326-2216

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-326-2216

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Fri, Sep 21, 1990

Schedule B Code

8538907080

Body Style

angle shape, external coupling

Bushing Diameter

0.040 inches minimum and 0.060 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Length

0.330 inches minimum and 0.350 inches maximum

Connector Locking Method

externally threaded shell

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Frequency Rating

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.330 inches minimum and 0.350 inches maximum

Distance From Mounting Shoulder To Rear Face

0.390 inches minimum and 0.410 inches maximum

Environmental Protection

corrosion resistant and vibration resistant and moisture resistant and thermal shock resistant

Flange Length

0.490 inches minimum and 0.510 inches maximum

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material Document And Classification

Insert Material

Mating End Quantity

1

Nominal Thread Size

0.250 inches

Operating Temp Rating

-65.0 celsius minimum and 165.0 celsius maximum

Overall Height

0.895 inches minimum and 0.915 inches maximum

Overall Length

0.708 inches nominal

Overall Width

0.490 inches minimum and 0.510 inches maximum

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.005 gold grains, troy

Radio Frequency Type Contact Characteristic Impedance In Ohms

unable to decode

Shell Surface Treatment Document And Classification

qq-p-35 fed spec single treatment response

Shell Material

steel corrosion resisting

Shell Surface Treatment

passivate

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

36

Thread Series Designator

uns

Threaded Device Type

coupling facility

Unthreaded Mounting Hole Diameter

0.102 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

00752

L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products

U.s./canadian manufacturers

26805

Tyco Electronics Corp

U.s./canadian manufacturers

95077

Sv Microwave, Inc. Div Sv Microwave

U.s./canadian manufacturers

98291

Itt Cannon Rf Products

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-326-2216?

   The FSCG of the NSN 5935-01-326-2216 is 5935

2. Does the NSN 5935-01-326-2216 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-326-2216 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-326-2216 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-326-2216 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-326-2216 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Fri, Sep 21, 1990