NSN 44202H

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

breaks before makes each section periphery contact switching action, 3.0 amperes resistive load lowest dc voltage rating at sea level contact load current rating, 20.0 amperes resistive load lowest ac voltage rating at sea level contact load current rating, 1.0 amperes resistive load highest dc voltage rating at sea level contact load current rating, 6.0 amperes resistive load highest ac voltage rating at sea level contact load current rating.

NSN 5930-01-173-7619 Datasheet

(NSN) National Stock Number

5930-01-173-7619

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-173-7619

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Thu, Mar 8, 1984

Schedule B Code

8536509025

Contact Load Current Rating

6.0 amperes resistive load highest ac voltage rating at sea level

Contact Load Current Rating

1.0 amperes resistive load highest dc voltage rating at sea level

Contact Load Current Rating

20.0 amperes resistive load lowest ac voltage rating at sea level

Contact Load Current Rating

3.0 amperes resistive load lowest dc voltage rating at sea level

Contact Switching Action

breaks before makes each section periphery

Contact Voltage Rating In Volts

120.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

125.0 lowest dc voltage rating at sea level

Contact Voltage Rating In Volts

250.0 highest dc voltage rating at sea level

Contact Voltage Rating In Volts

600.0 highest ac voltage rating at sea level

Features Provided

actuator knob

Hazardous Locations/Environmental Protection

moisture resistant

Individual Section Quantity

2

Longest Horizontal Distance Between Mounting Centers

2.000 inches nominal single mounting facility

Longest Vertical Distance Between Mounting Centers

2.188 inches nominal single mounting facility

Mounting Facility Pattern

isosceles triangle single mounting facility

Mounting Method

bracket(s) and unthreaded hole(s) single mounting facility

Overall Height

2.910 inches nominal

Overall Length

5.378 inches nominal

Overall Width

2.810 inches nominal

Precious Material And Location

contact surfaces silver

Precious Material

silver

Shortest Horizontal Distance Between Mounting Centers

1.000 inches nominal single mounting facility

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

8 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

adjustable stop single actuator

Switch Contact Basic Design

nonpile-up nonsymmetrical

Terminal Type

tab w/screw

Unthreaded Mounting Hole Diameter

0.201 inches nominal single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

27192

Drs Naval Power Systems Inc Dba Drs Power & Control Technologies Inc

U.s./canadian manufacturers

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-173-7619?

   The FSCG of the NSN 5930-01-173-7619 is 5930

2. Does the NSN 5930-01-173-7619 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-01-173-7619 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-173-7619 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-173-7619 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-173-7619 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Thu, Mar 8, 1984