NSN 5Y7175

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2520-00-734-9416, kit.

NSN 2520-00-734-9416 Datasheet

(NSN) National Stock Number

2520-00-734-9416

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2520 - Vehicular Power Transmission Components

(NIIN) National Item Identification Number

00-734-9416

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sun, Jan 1, 1961

Schedule B Code

8483909500

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1321550

Cross Reference

CAGE Codes

63734

Kaitlin Corp

U.s./canadian manufacturers

76040

Mack Trucks Inc Parts Opn

U.s./canadian manufacturers

08683

Brockway Motor Trucks Div of Mack Trucks Inc

U.s./canadian manufacturers

65282

White Motor Corp

U.s./canadian manufacturers

95201

Napco International Llc Dba Napco International Inc

U.s./canadian manufacturers

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

19107

Dart Truck Co

U.s./canadian manufacturers

33323

Kenworth Truck Co a Div of Paccar Inc

U.s./canadian manufacturers

3D6E9

Meritor Industrial Products, Llc

U.s./canadian manufacturers

72260

Corbitt Co Inc

U.s./canadian manufacturers

78500

Meritor Heavy Vehicle Systems, Llc

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8483-90-9500

Description

parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts

End Use

21180 - Industrial machines, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74890

(NAICS) North American Industrial Classification System

333613

Questions & Answers

1. What is the FSCG of the NSN 2520-00-734-9416?

   The FSCG of the NSN 2520-00-734-9416 is 2520

2. Does the NSN 2520-00-734-9416 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483909500

3. Does NSN 2520-00-734-9416 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2520-00-734-9416 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2520-00-734-9416 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2520-00-734-9416 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961