NSN 77-2E1

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

unable to decode contact removability, salt water resistant environmental protection, externally threaded shell and internally threaded coupling nut connector locking method, unable to decode included contact type, unable to decode included contact quantity.

NSN 5935-00-786-5587 Datasheet

(NSN) National Stock Number

5935-00-786-5587

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-786-5587

Requires Demilitarization

Yes

(INC) Item Name Code

15091

Date

Mon, Jan 1, 1962

Schedule B Code

8548900100

Connector Locking Method

externally threaded shell and internally threaded coupling nut

Contact Removability

unable to decode

Environmental Protection

salt water resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Material

unable to decode

Mating End Quantity

3

Nominal Thread Size

0.625 inches

Overall Height

1.750 inches nominal

Overall Length

4.625 inches nominal

Overall Width

2.125 inches nominal

Radio Frequency Type Contact Characteristic Impedance In Ohms

unable to decode

Shell Material

copper alloy

Thread Series Designator

unef

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015091

Cross Reference

CAGE Codes

82005

Allard Nazarian Group, Inc. Dba Granite State Manufacturing

U.s./canadian manufacturers

04597

Projects Unlimited Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-786-5587?

   The FSCG of the NSN 5935-00-786-5587 is 5935

2. Does the NSN 5935-00-786-5587 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-00-786-5587 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-786-5587 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-786-5587 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-786-5587 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962