NSN 77C707933-341

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

45.0 body angle in deg, cable clamp connector cable strain relief method, angle shape w/cable clamp body style, 0.922 inches minimum and 1.375 inches maximum cable entrance diameter, internally threaded coupling ring connector locking method.

NSN 5935-00-893-8502 Datasheet

(NSN) National Stock Number

5935-00-893-8502

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-893-8502

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Mon, Jan 30, 1967

Schedule B Code

8536695050

Body Angle In Deg

45.0

Body Style

angle shape w/cable clamp

Cable Entrance Diameter

0.922 inches minimum and 1.375 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

internally threaded coupling ring

Contact Removability

nonremovable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

500.0 single mating end single contact grouping

Contact Maximum Current Rating In Amps

22.0 single mating end single contact grouping

Contact Maximum Dc Voltage Rating In Volts

700.0 single mating end single contact grouping

Contact Position Arrangement Style

36-10 single mating end

Contact Surface Treatment

gold and nickel single mating end single contact grouping

Distance From Centerline To Connector End

3.585 inches nominal

Distance From Centerline To Cable End

3.126 inches maximum

Environmental Protection

moisture proof and salt water resistant and vibration proof

Included Contact Quantity

48 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Material

rubber single mating end

Insert Position In Deg

235.0

Mating End Quantity

1

Nominal Thread Size

2.250 inches

Overall Diameter

2.463 inches maximum

Polarization Method

key, multiple key groove

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.048 gold grains, troy

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

solder well single mating end single contact grouping

Test Data Document

03538-re49d768 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

16

Thread Series Designator

un

Threaded Device Type

coupling facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-893-8502?

   The FSCG of the NSN 5935-00-893-8502 is 5935

2. Does the NSN 5935-00-893-8502 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-893-8502 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-893-8502 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-893-8502 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-893-8502 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Mon, Jan 30, 1967