NSN AASK39960D2PC43

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.688 inches nominal bulb diameter, 120.000 inches nominal capillary tube length, 3.625 inches nominal bulb length, +110.00 to 185.00 actuation point degrees fahrenheit contact adjustment range, actuation point adjustable contact adjustability.

NSN 5930-00-897-8573 Datasheet

(NSN) National Stock Number

5930-00-897-8573

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-897-8573

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Tue, Jan 1, 1963

Schedule B Code

9032100000

Bulb Diameter

0.688 inches nominal

Bulb Length

3.625 inches nominal

Capillary Tube Length

120.000 inches nominal

Contact Adjustability

actuation point adjustable

Contact Adjustment Range

+110.00 to 185.00 actuation point degrees fahrenheit

Contact Adjustment Type

external actuation point screw

Contact Load Current Rating

unable to decode

Contact Voltage Rating In Volts

unable to decode

Frequency In Hertz

unable to decode

Hazardous Locations/Environmental Protection

watertight

Longest Horizontal Distance Between Mounting Centers

2.406 inches nominal

Longest Vertical Distance Between Mounting Centers

3.281 inches nominal

Mounting Method

bracket(s)

Nonpile-Up Contact Arrangement

1 pole, double throw, both positions maintained

Overall Height

5.812 inches nominal

Overall Length

5.000 inches nominal

Overall Width

2.688 inches nominal

Shortest Horizontal Distance Between Mounting Centers

0.656 inches nominal

Temp Sensing Element Type

capillary tube-bulb

Terminal Type

tab w/screw

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

96452

American Standard Inc Controls Dept Products Group

U.s./canadian manufacturers

19278

Detroit Switch Inc Dba Detroit Switch Inc

U.s./canadian manufacturers

65586

Chromalox Inc Dba Chromalox Precision Heat and Control, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-00-897-8573?

   The FSCG of the NSN 5930-00-897-8573 is 5930

2. Does the NSN 5930-00-897-8573 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-00-897-8573 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-897-8573 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-00-897-8573 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-897-8573 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963