NSN BA31029

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

3.562 inches nominal overall length, screw terminal type, 1 shank,3 conductors per shank,1.144 in. lg incl tip,0.250 in. dia; cross-sectional dim. of shell,0.422 in dia,2.297 in. deep 0.336 in. max s ize of cable opening special features.

NSN 5935-00-259-0574 Datasheet

(NSN) National Stock Number

5935-00-259-0574

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-259-0574

Requires Demilitarization

Yes

(INC) Item Name Code

00178

Date

Tue, Jan 1, 1963

Schedule B Code

8517700000

Overall Length

3.562 inches nominal

Special Features

1 shank,3 conductors per shank,1.144 in. lg incl tip,0.250 in. dia; cross-sectional dim. of shell,0.422 in dia,2.297 in. deep 0.336 in. max s ize of cable opening

Terminal Type

screw

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000178

Cross Reference

CAGE Codes

28528

Itt Industries Inc Itt Aerospace Communications Div East

U.s./canadian manufacturers

31550

L3harris Technologies, Inc. Dba Harris Corporation

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5935-00-259-0574?

   The FSCG of the NSN 5935-00-259-0574 is 5935

2. Does the NSN 5935-00-259-0574 have a Schedule B code assigned?

   Yes, the Schedule B code is 8517700000

3. Does NSN 5935-00-259-0574 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-259-0574 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5935-00-259-0574 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-259-0574 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963