NSN BP08CE-22-55S

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

bayonet slot connector locking method, cable clamp connector cable strain relief method, angle shape w/cable clamp body style, 90.0 body angle in deg, 0.490 inches minimum and 0.525 inches maximum cable entrance diameter.

NSN 5935-00-080-5458 Datasheet

(NSN) National Stock Number

5935-00-080-5458

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

00-080-5458

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Wed, Dec 13, 1967

Schedule B Code

8536695050

Body Angle In Deg

90.0

Body Style

angle shape w/cable clamp

Cable Entrance Diameter

0.490 inches minimum and 0.525 inches maximum

Connector Cable Strain Relief Method

cable clamp

Connector Locking Method

bayonet slot

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

removable single mating end single contact grouping

Contact Maximum Ac Voltage Rating In Volts

600.0 single mating end single contact grouping

Contact Position Arrangement Style

22-55 single mating end

Contact Surface Treatment

gold single mating end single contact grouping

Distance From Centerline To Cable End

1.108 inches minimum and 1.170 inches maximum

Distance From Centerline To Connector End

1.511 inches nominal

Environmental Protection

corrosion resistant and moisture resistant

Included Contact Quantity

55 single mating end single contact grouping

Included Contact Type

round socket single mating end single contact grouping

Insert Material

rubber chloroprene class cr single mating end

Insert Position In Deg

0.0

Mating End Quantity

1

Overall Diameter

1.672 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Shell Material

aluminum

Shell Surface Treatment

anodize

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-00-080-5458?

   The FSCG of the NSN 5935-00-080-5458 is 5935

2. Does the NSN 5935-00-080-5458 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-00-080-5458 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-00-080-5458 contain precious materials?

   Item contains gold.

5. Does NSN 5935-00-080-5458 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-00-080-5458 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Wed, Dec 13, 1967