NSN CSTYLE4

An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.

actuation point not adjustable contact adjustability, unable to decode contact voltage rating in volts, increase contact action stimulus, unable to decode contact load current rating, 75.00 actuation point nominal degrees celsius and 70.00 deactuation point nominal degrees celsius contact stimulus rating.

NSN 5930-00-296-6554 Datasheet

(NSN) National Stock Number

5930-00-296-6554

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-296-6554

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Tue, Jan 1, 1963

Schedule B Code

9032100000

Contact Action Stimulus

increase

Contact Adjustability

actuation point not adjustable

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

75.00 actuation point nominal degrees celsius and 70.00 deactuation point nominal degrees celsius

Contact Voltage Rating In Volts

unable to decode

Mounting Method

base

Nonpile-Up Contact Arrangement

1 pole, single throw, normally closed, momentary action

Operating Temp Rating

-90.0 fahrenheit minimum and 300.0 fahrenheit maximum

Overall Height

0.344 inches nominal

Overall Length

0.969 inches nominal

Overall Width

0.750 inches nominal

Temp Sensing Element Type

internal sensor

Terminal Type

solder stud

Special Features

two mtg terminals spaced 0.486 in. c to c

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

1VPW8

General Dynamics Mission Systems, Inc. Dba Gdms

U.s./canadian manufacturers

94990

Motorola Inc. Dba Integrated Information Systems Group

U.s./canadian manufacturers

82383

Stevens Mfg Co

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-00-296-6554?

   The FSCG of the NSN 5930-00-296-6554 is 5930

2. Does the NSN 5930-00-296-6554 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-00-296-6554 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-296-6554 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-296-6554 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-296-6554 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963