NSN DPKA-51PC-7

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

unable to decode contact position arrangement style, friction connector locking method, unable to decode contact material, 0.558 inches minimum and 0.566 inches maximum center to center distance between mounting facilities parallel to height, straight shape body style.

NSN 5935-01-077-2650 Datasheet

(NSN) National Stock Number

5935-01-077-2650

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-077-2650

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Sun, May 20, 1979

Schedule B Code

8538907080

Body Style

straight shape

Center To Center Distance Between Mounting Facilities Parallel To Height

0.558 inches minimum and 0.566 inches maximum

Connector Locking Method

friction

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment Document And Classification

unable to decode

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

2.570 inches minimum and 2.580 inches maximum

Distance From Mounting Shoulder To Front Face

0.519 inches minimum and 0.534 inches maximum

Environmental Protection

humidity resistant and shock resistant and thermal shock resistant and corrosion resistant and vibration resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Mating End Quantity

1

Nominal Thread Size

0.138 inches

Operating Temp Rating

-65.0 celsius minimum and 200.0 celsius maximum

Overall Height

1.146 inches minimum and 1.170 inches maximum

Overall Length

1.385 inches maximum

Overall Width

3.000 inches minimum and 3.030 inches maximum

Polarization Method

mating end

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.051 gold grains, troy

Shell Material Document And Classification

qq-a-591 fed spec single material response

Shell Material

aluminum alloy

Shell Surface Treatment Document And Classification

mil-c-26074,grade a,cl 3 or 4 mil spec single treatment response

Shell Surface Treatment

nickel

Shell Type

solid

Special Features

furnished items - spare contact and mounting locknut

Specification/Standard Data

81349-mil-c-83733/6 government specification

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-83733 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Threaded Device Type

mounting hole

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

94756

The Boeing Company Div Legacy Boeing Hb1

U.s./canadian manufacturers

81755

Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

71468

Itt Cannon Llc

U.s./canadian manufacturers

54418

Miltope Corporation

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

55104

Tri-Star Electronics International, Inc. Dba Carlisle Interconnect Div Carlisle Interconnect Technologies

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-077-2650?

   The FSCG of the NSN 5935-01-077-2650 is 5935

2. Does the NSN 5935-01-077-2650 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-077-2650 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-077-2650 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-077-2650 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-077-2650 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Sun, May 20, 1979