NSN MC2853

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

vibrating action type, dustproof environmental protection, 400.0 hertz nominal frequency rating, included inclosure, 3.438 inches nominal center to center distance between mounting holes.

NSN 6350-00-775-0382 Datasheet

(NSN) National Stock Number

6350-00-775-0382

(FSG) Federal Supply Group

63 - Alarm, Signal and Security Detection Systems

(FSC) Federal Supply Classification

6350 - Security Detection Systems, Signal and Miscellaneous Alarm

(NIIN) National Item Identification Number

00-775-0382

Requires Demilitarization

Yes

(INC) Item Name Code

14633

Date

Fri, Jan 1, 1960

Schedule B Code

8531900002

Action Type

vibrating

Center To Center Distance Between Mounting Holes

3.438 inches nominal

Environmental Protection

dustproof

Frequency Rating

400.0 hertz nominal

Inclosure

included

Mounting Hole Diameter

0.156 inches nominal

Mounting Hole Quantity

2

Overall Height

1.562 inches nominal

Overall Length

3.812 inches nominal

Overall Width

2.812 inches nominal

Surface Treatment

paint

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9G - Defense supply center richmond, virginia 23297

Pseudo Item Name Code

0014633

Cross Reference

CAGE Codes

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

30703

Essex Products Group, Inc. Dba Industrial Timer Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

52340

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

012530

Schedule B & Trade

Schedule B

8531-90-0002

Description

parts of electric sound or visual signaling apparatus other than printed circuit assemblies, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77885

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 6350-00-775-0382?

   The FSCG of the NSN 6350-00-775-0382 is 6350

2. Does the NSN 6350-00-775-0382 have a Schedule B code assigned?

   Yes, the Schedule B code is 8531900002

3. Does NSN 6350-00-775-0382 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6350-00-775-0382 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6350-00-775-0382 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6350-00-775-0382 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960