NSN MS24266E18B8PY

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

nonremovable single mating end single contact grouping contact removability, copper alloy single mating end single contact grouping contact material, bayonet slot connector locking method, straight shape, internal coupling body style, 18-8 single mating end contact position arrangement style.

NSN 5935-01-460-1628 Datasheet

(NSN) National Stock Number

5935-01-460-1628

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-460-1628

Requires Demilitarization

Yes

(INC) Item Name Code

01938

Date

Wed, Oct 28, 1998

Schedule B Code

8536695050

Body Style

straight shape, internal coupling

Connector Locking Method

bayonet slot

Contact Material

copper alloy single mating end single contact grouping

Contact Removability

nonremovable single mating end single contact grouping

Contact Position Arrangement Style

18-8 single mating end

Contact Surface Treatment

gold single mating end single contact grouping

Included Contact Quantity

8 single mating end single contact grouping

Included Contact Type

round pin single mating end single contact grouping

Insert Position In Deg

0.0 and 98.0 and 152.0 and 268.0 and 338.0

Mating End Quantity

1

Nominal Thread Size

1.362 inches

Overall Diameter

1.375 inches maximum

Overall Length

1.375 inches maximum

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold

Precious Material

gold

Shell Material

steel corrosion resisting

Shell Surface Treatment

passivate

Shell Type

solid

Terminal Location

back single mating end single contact grouping

Terminal Type

crimp single mating end single contact grouping

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

36

Thread Series Designator

uns

Threaded Device Type

back shell

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0001938

Cross Reference

CAGE Codes

26512

Northrop Grumman Systems Corporation Dba Northrop Grumman Is Div Mission Systems

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-460-1628?

   The FSCG of the NSN 5935-01-460-1628 is 5935

2. Does the NSN 5935-01-460-1628 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-460-1628 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-460-1628 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-460-1628 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-460-1628 was assigned to the Federal Catalog?

   It was assigned 27 years ago, on Wed, Oct 28, 1998