NSN MS27474E20A2SB

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

bayonet pin connector locking method, unable to decode contact position arrangement style, unable to decode contact material, straight shape threaded body style, round bushing accommodation hole shape.

NSN 5935-01-044-8661 Datasheet

(NSN) National Stock Number

5935-01-044-8661

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-044-8661

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Fri, Jul 22, 1977

Schedule B Code

8538907080

Body Style

straight shape threaded

Bushing Accommodation Hole Shape

round

Connector Locking Method

bayonet pin

Contact Material

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Surface Treatment

Distance From Mounting Shoulder To Front Face

0.464 inches nominal

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Included Contact Quantity

unable to decode

Included Contact Type

unable to decode

Insert Position In Deg

330.0

Mating End Quantity

1

Mounting Facility Thickness

0.062 inches minimum and 0.109 inches maximum

Nominal Thread Length

0.062 inches

Nominal Thread Size

1.625 inches

Overall Diameter

2.016 inches nominal

Overall Length

0.948 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Precious Material And Weight

0.061 gold grains, troy and 0.061 silver grains, troy

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium and chromate

Shell Type

solid

Specification/Standard Data

81349-mil-c-38999 government specification

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-38999 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

unef

Threaded Device Type

mounting bushing

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-044-8661?

   The FSCG of the NSN 5935-01-044-8661 is 5935

2. Does the NSN 5935-01-044-8661 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-044-8661 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-044-8661 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-044-8661 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-044-8661 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Jul 22, 1977