NSN MS3100A32-101S

An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.

externally threaded shell connector locking method, 1.750 inches nominal center to center distance between mounting facilities parallel to height, unable to decode contact material document and classification, unable to decode contact position arrangement style, straight shape, external coupling body style.

NSN 5935-01-151-5144 Datasheet

(NSN) National Stock Number

5935-01-151-5144

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-151-5144

Requires Demilitarization

Yes

(INC) Item Name Code

15093

Date

Mon, Apr 18, 1983

Schedule B Code

8538907080

Body Style

straight shape, external coupling

Center To Center Distance Between Mounting Facilities Parallel To Height

1.750 inches nominal

Connector Locking Method

externally threaded shell

Contact Material Document And Classification

unable to decode

Contact Position Arrangement Style

unable to decode

Contact Removability

unable to decode

Contact Maximum Ac Voltage Rating In Volts

unable to decode

Contact Maximum Current Rating In Amps

unable to decode

Contact Surface Treatment Document And Classification

Contact Surface Treatment

Contact Surface Treatment

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.750 inches nominal

Distance From Mounting Shoulder To Front Face

0.875 inches minimum and 0.906 inches maximum

Environmental Protection

corrosion resistant and humidity resistant and vibration resistant

Included Contact Quantity

unable to decode

Insert Position In Deg

0.0

Mating End Quantity

1

Nominal Thread Length

0.438 inches and 0.625 inches

Nominal Thread Size

1.750 inches and 2.000 inches

Overall Height

2.250 inches nominal

Overall Length

2.436 inches maximum

Overall Width

2.250 inches nominal

Polarization Method

keyway or multiple keyway

Precious Material And Location

contact surfaces gold and contact surfaces silver

Precious Material

gold and silver

Shell Surface Treatment Document And Classification

qq-p-416 fed spec single treatment response

Shell Material

aluminum alloy

Shell Surface Treatment

cadmium

Shell Type

solid

Terminal Location

unable to decode

Terminal Type

unable to decode

Test Data Document

"81349-mil-c-5015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series Designator

uns

Threaded Device Type

back shell and coupling facility

Unthreaded Mounting Hole Diameter

0.168 inches minimum and 0.183 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015093

Cross Reference

CAGE Codes

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8538-90-7080

Description

parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77282

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5935-01-151-5144?

   The FSCG of the NSN 5935-01-151-5144 is 5935

2. Does the NSN 5935-01-151-5144 have a Schedule B code assigned?

   Yes, the Schedule B code is 8538907080

3. Does NSN 5935-01-151-5144 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-151-5144 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5935-01-151-5144 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-151-5144 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Mon, Apr 18, 1983