NSN NAS1802-3D7

An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). Excludes:terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. For items having printed electrical conductor paths, see printed wiring board.

0.105 inches minimum and 0.120 inches maximum head height, hexagon head style, 0.046 inches minimum and 0.056 inches maximum hole diameter, 0.422 inches minimum and 0.469 inches maximum fastener length, hexagon corners head hole configuration style.

NSN 5305-01-252-5289 Datasheet

(NSN) National Stock Number

5305-01-252-5289

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-252-5289

Requires Demilitarization

Yes

(INC) Item Name Code

06657

Date

Fri, Apr 3, 1987

Schedule B Code

7318152000

Fastener Length

0.422 inches minimum and 0.469 inches maximum

Head Height

0.105 inches minimum and 0.120 inches maximum

Head Hole Configuration Style

hexagon corners

Head Style

hexagon

Hole Diameter

0.046 inches minimum and 0.056 inches maximum

Hole Quantity

3

Internal Drive Style

cross recess type 1

Minimum Tensile Strength

160000 pounds per square inch

Nominal Thread Diameter

0.190 inches

Screw Material Document And Classification

ams5731 assn std single material response or ams5737 assn std single material response

Screw Material

iron alloy 660

Screw Surface Treatment Document And Classification

qq-p-35 fed spec single treatment response

Screw Surface Treatment

passivate

Specification/Standard Data

80205-nas1802 professional/industrial association standard

Thread Class

3a

Thread Direction

right-hand

Thread Length

0.358 inches minimum and 0.437 inches maximum

Thread Quantity Per Inch

32

Thread Series Designator

unified national joint fine (unjf)

Width Between Flats

0.305 inches minimum and 0.314 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0006657

Cross Reference

CAGE Codes

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

80205

National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

72E - Engineer and material handling equipment, test/tool sets and equipment

National Motor Freight Classification Item Number

133300

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-01-252-5289?

   The FSCG of the NSN 5305-01-252-5289 is 5305

2. Does the NSN 5305-01-252-5289 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-01-252-5289 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-01-252-5289 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5305-01-252-5289 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-01-252-5289 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Fri, Apr 3, 1987