NSN PD15

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

2 type and 4 style nondefinitive spec/std data, washer faced bearing surface type, 0.535 inches minimum and 0.559 inches maximum nut height, 0.625 inches nominal thread size, steel overall material.

NSN 5310-00-275-9335 Datasheet

(NSN) National Stock Number

5310-00-275-9335

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5310 - Nuts and Washers

(NIIN) National Item Identification Number

00-275-9335

Requires Demilitarization

Yes

(INC) Item Name Code

01857

Date

Tue, Jan 1, 1963

Bearing Surface Type

washer faced

Material

steel overall

Nominal Thread Size

0.625 inches

Nondefinitive Spec/Std Data

2 type and 4 style

Nut Height

0.535 inches minimum and 0.559 inches maximum

Nut Style

hexagon

Thread Class

2b

Thread Direction

right-hand

Thread Quantity Per Inch

18

Thread Series

unf

Width Across Flats

0.922 inches minimum and 0.938 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0001857

Cross Reference

CAGE Codes

11083

Caterpillar Inc Div Caterpillar Defense

U.s./canadian manufacturers

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

94135

Naval Ordnance Standards

Military standards and standards organizations (ex:stanags,milspecs,defstans)

66289

Wisconsin Motors Llc

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 5310-00-275-9335?

   The FSCG of the NSN 5310-00-275-9335 is 5310

2. Does NSN 5310-00-275-9335 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5310-00-275-9335 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5310-00-275-9335 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5310-00-275-9335 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963