NSN PL501E124AFPC49

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

2.250 inches nominal fork depth, 8.750 inches nominal distance from pivot pinhole center to rod connection end, 0.750 inches nominal distance from pivot pinhole center to fork end, 1.875 inches nominal fork span width, 0.500 inches nominal fork arm thickness.

NSN 5340-00-333-5947 Datasheet

(NSN) National Stock Number

5340-00-333-5947

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-333-5947

Requires Demilitarization

Yes

(INC) Item Name Code

03796

Date

Mon, Dec 24, 1973

Distance From Pivot Pinhole Center To Fork End

0.750 inches nominal

Distance From Pivot Pinhole Center To Rod Connection End

8.750 inches nominal

Fork Span Width

1.875 inches nominal

Fork Arm Thickness

0.500 inches nominal

Fork Depth

2.250 inches nominal

Hole Diameter

0.750 inches minimum and 0.751 inches maximum

Material Document And Classification

qq-s-634,cond cf fed spec single material response shank

Material Document And Classification

qq-s-691,class a fed spec single material response body

Material

steel body

Material

steel comp 1018 shank

Nominal Thread Size

0.500 inches rod connection

Overall Height

1.250 inches nominal

Overall Width

2.875 inches nominal

Shank Diameter

0.500 inches nominal

Shank Length

5.500 inches nominal

Style Designator

clevis

Special Features

two additional pivot pin holes located 2.250 in. from end of fork

Thread Class

3a rod connection

Thread Direction

right-hand rod connection

Thread Length

5.500 inches nominal rod connection

Thread Series Designator

unified national coarse (unc) rod connection

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0003796

Cross Reference

CAGE Codes

03502

General Electric Co Naval and Drive Turbine Systems Dept

U.s./canadian manufacturers

90099

Northrop Grumman Systems Corporation Div Marine Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49240

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094140

Questions & Answers

1. What is the FSCG of the NSN 5340-00-333-5947?

   The FSCG of the NSN 5340-00-333-5947 is 5340

2. Does NSN 5340-00-333-5947 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

3. Does NSN 5340-00-333-5947 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-00-333-5947 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-333-5947 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Mon, Dec 24, 1973