NSN RSE116663

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

1.401 inches minimum and 1.411 inches maximum center to center distance between outside mounting holes along length, 1.105 inches minimum and 1.115 inches maximum body mounting hole accommodation length, 14 accommodated contact quantity, top or bottom mount w/molded saddle and bushing body style, 1.030 inches minimum and 1.040 inches maximum body mounting hole accommodation width.

NSN 5935-01-331-8635 Datasheet

(NSN) National Stock Number

5935-01-331-8635

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-331-8635

Requires Demilitarization

Yes

(INC) Item Name Code

28914

Date

Sat, Dec 29, 1990

Schedule B Code

8536695050

Accommodated Contact Quantity

14

Body Mounting Hole Accommodation Length

1.105 inches minimum and 1.115 inches maximum

Body Mounting Hole Accommodation Width

1.030 inches minimum and 1.040 inches maximum

Body Style

top or bottom mount w/molded saddle and bushing

Center To Center Distance Between Outside Mounting Holes Along Length

1.401 inches minimum and 1.411 inches maximum

Center To Center Distance Between Outside Mounting Holes Along Width

0.620 inches minimum and 0.630 inches maximum

Contact Position Arrangement Style

irregular

Fabrication Method

molded

Furnished Items And Quantity

9 nut and 9 flat washer and 3 stud

Mounting Hole Diameter

0.190 inches nominal

Mounting Method

threaded stud(s)

Mounting Hole Style

rectangular, w/three mounting holes/slots

Mounting Type For Which Designed

chassis

Nominal Thread Size

0.190 inches and 0.112 inches

Overall Height

0.890 inches maximum

Overall Length

1.740 inches maximum

Overall Width

0.990 inches minimum and 1.010 inches maximum

Polarization Type

contact position

Precious Material And Location

contact surfaces gold

Precious Material

gold

Precious Material And Weight

0.014 gold grains, troy

Projection Length Above Mounting Surface

0.088 inches minimum and 0.098 inches maximum

Specification/Standard Data

81349-mil-c-12883/40 government specification

Temp Rating

-70.0 celsius and 125.0 celsius

Terminal Type And Quantity

14 crimp

Test Data Document

"81349-mil-c-12883 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

32 and 40

Thread Series Designator

unf and unified national coarse (unc)

Body Material

unable to decode and unable to decode

Contact Material

unable to decode

Contact Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0028914

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

58982

Amphenol Pcd Inc Dba Amphenol Pcd Inc Div Amphenol Pcd

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Schedule B & Trade

Schedule B

8536-69-5050

Description

electrical plugs & sockets, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77258

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5935-01-331-8635?

   The FSCG of the NSN 5935-01-331-8635 is 5935

2. Does the NSN 5935-01-331-8635 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536695050

3. Does NSN 5935-01-331-8635 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-331-8635 contain precious materials?

   Item contains gold.

5. Does NSN 5935-01-331-8635 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-331-8635 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Sat, Dec 29, 1990