NSN SCI9910-101Y

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, nonwire wound; nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.

0.105 inches minimum and 0.115 inches maximum body length, 0.151 inches minimum and 0.161 inches maximum body diameter, burn in features provided, 100.000 picofarads single section capacitance value per section, w/o mtg facilities, axial terminals body style.

NSN 5910-01-339-1419 Datasheet

(NSN) National Stock Number

5910-01-339-1419

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-339-1419

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Fri, May 17, 1991

Schedule B Code

8532290040

Body Diameter

0.151 inches minimum and 0.161 inches maximum

Body Length

0.105 inches minimum and 0.115 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

100.000 picofarads single section

Features Provided

burn in

Insulation Resistance At Maximum Operating Temp

50.0 megohms

Insulation Resistance At Reference Temp

500.0 megohms

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Precious Material And Location

terminal and body surfaces gold

Reliability Indicator

not established

Schematic Diagram Designator

feedthrough

Terminal Diameter

0.028 inches minimum and 0.032 inches maximum

Terminal Length

0.370 inches minimum and 0.430 inches maximum

Terminal Surface Treatment

gold

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-0.00 to 100.00 percent single section

Voltage Temp Limits Per Section In Percent Capacitance Change

-40.0 to 15.0 without voltage applied single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

33095

Spectrum Control Inc

U.s./canadian manufacturers

59942

Avx Filters Corporation

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-339-1419?

   The FSCG of the NSN 5910-01-339-1419 is 5910

2. Does the NSN 5910-01-339-1419 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-339-1419 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-339-1419 contain precious materials?

   Item contains gold.

5. Does NSN 5910-01-339-1419 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-339-1419 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Fri, May 17, 1991