NSN TYPESSHEETPACKING

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

plant fiber type, 12.000 inches nominal length, paper location not otherwise specified material, oil resistant and gasoline and mildew resistant and ether and carbon disulfide and chloroform and benzol and carbon tetrachloride environmental protection, mil-g-12803,no. f326128-6 mil spec single material response location not otherwise specified material document and classification.

NSN 5330-00-290-7914 Datasheet

(NSN) National Stock Number

5330-00-290-7914

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-290-7914

Requires Demilitarization

Yes

(INC) Item Name Code

11418

Date

Tue, Jan 1, 1963

Schedule B Code

8487900040

Environmental Protection

oil resistant and gasoline and mildew resistant and ether and carbon disulfide and chloroform and benzol and carbon tetrachloride

Fiber Type

plant

Length

12.000 inches nominal

Material Document And Classification

mil-g-12803,no. f326128-6 mil spec single material response location not otherwise specified

Material

paper location not otherwise specified

Special Features

mil-g-12803i/n f326 28m6

Thickness

0.031 inches nominal

Width

12.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0011418

Cross Reference

CAGE Codes

16712

Siemens Energy, Inc.

U.s./canadian manufacturers

79144

Vellumoid, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

R - 65.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

75560

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

151190

Schedule B & Trade

Schedule B

8487-90-0040

Description

oil seals, other than those of chapter 40, machinery parts not containing electrical features

End Use

21180 - Industrial machines, other

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74999

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-00-290-7914?

   The FSCG of the NSN 5330-00-290-7914 is 5330

2. Does the NSN 5330-00-290-7914 have a Schedule B code assigned?

   Yes, the Schedule B code is 8487900040

3. Does NSN 5330-00-290-7914 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-00-290-7914 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5330-00-290-7914 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-00-290-7914 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963