NSN 186238-14

A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see stud (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see nut (as modified); use maximum dimensions(s) for compliance.

1.300 inches maximum distance from centerline to connector end, 1.280 inches nominal distance from centerline to cable end, 0.250 inches minimum and 0.625 inches maximum cable opening diameter, 1 cable opening quantity, 90.0 body angle in deg.

NSN 5935-01-338-0807 Datasheet

(NSN) National Stock Number

5935-01-338-0807

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5935 - Electrical Connectors

(NIIN) National Item Identification Number

01-338-0807

Requires Demilitarization

Yes

(INC) Item Name Code

23010

Date

Fri, Apr 26, 1991

Schedule B Code

8548900100

Body Angle In Deg

90.0

Cable Opening Quantity

1

Cable Opening Diameter

0.250 inches minimum and 0.625 inches maximum

Distance From Centerline To Cable End

1.280 inches nominal

Distance From Centerline To Connector End

1.300 inches maximum

Material

aluminum alloy location not otherwise specified

Mounting Facility Type And Quantity

1 threaded coupling

Nominal Thread Size

25.0 millimeters

Overall Width

1.250 inches maximum

Size Designation

17

Style Designator

clamp, angle tie strap type

Surface Treatment

nickel

Thread Direction

right-hand

Thread Pitch In Millimeters

1.00

Thread Series Designator

iso m

Thread Tolerance Class

6h internal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0023010

Cross Reference

CAGE Codes

12813

Raytheon Company Dba Raytheon

U.s./canadian manufacturers

06324

Glenair, Inc.

U.s./canadian manufacturers

73030

Hamilton Sundstrand Corporation Dba Collins Aerospace

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

S - 60.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34370

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061200

Questions & Answers

1. What is the FSCG of the NSN 5935-01-338-0807?

   The FSCG of the NSN 5935-01-338-0807 is 5935

2. Does the NSN 5935-01-338-0807 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5935-01-338-0807 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5935-01-338-0807 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5935-01-338-0807 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5935-01-338-0807 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Fri, Apr 26, 1991